- Codice RS:
- 298-3957
- Costruttore:
- RS PRO
2 In consegna il giorno lavorativo successivo per ordini pervenuti entro le 19:00 (magazzino in Italia)
20 Entro 1 giorni lavorativi per ordini effettuati entro le 19:00 (magazzini in Europa)
Prezzo per Unità
€ 42,99
(IVA esclusa)
€ 52,45
(IVA inclusa)
Unità | Per unità |
1 - 9 | € 42,99 |
10 - 19 | € 41,23 |
20 + | € 39,98 |
- Codice RS:
- 298-3957
- Costruttore:
- RS PRO
Documentazione Tecnica
Normative
- Paese di origine:
- GB
Dettagli prodotto
Scatole di messa a terra
RS PRO earth bonding boxes with 3 x 10 mm studs which are ideal for any workplaces where sensitive electronic equipment must be protected from static electricity.
Options available include:
298-3957 – Earth bonding box, 3x10mm stud
298-3941 – Earth bonding box, 2x4mm sockets,1x10mm stud
298-3935 - Earth bonding box, 3 x 4mm sockets
These EBP boxes meet the need defined in EN 61340-5 for connecting the elements of an ESD Protected Area (EPA) to a common connection point or Earth Bonding Point (EBP).
The normal earth contact is linked via an individual 1 meg-ohm current limiting resistor. In the event of a workstation element inadvertent contact with the mains supply voltage, the resistor will limit the fault current to less than 0.3 mA at 240 V.
RS PRO have a great range of ESD grounding accessories including bonding plugs, bonding boxes, bonding brackets and cords plus many more to help eliminate the build-up of static discharge which can be a risk to static sensitive components or devices.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Options available include:
298-3957 – Earth bonding box, 3x10mm stud
298-3941 – Earth bonding box, 2x4mm sockets,1x10mm stud
298-3935 - Earth bonding box, 3 x 4mm sockets
These EBP boxes meet the need defined in EN 61340-5 for connecting the elements of an ESD Protected Area (EPA) to a common connection point or Earth Bonding Point (EBP).
The normal earth contact is linked via an individual 1 meg-ohm current limiting resistor. In the event of a workstation element inadvertent contact with the mains supply voltage, the resistor will limit the fault current to less than 0.3 mA at 240 V.
RS PRO have a great range of ESD grounding accessories including bonding plugs, bonding boxes, bonding brackets and cords plus many more to help eliminate the build-up of static discharge which can be a risk to static sensitive components or devices.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Features and Benefits:
Può essere montata sotto al banco
Collega fino a 3 elementi dell'EPA a massa
Completa di cavo di massa da 2 m con terminali a forcella
Sagomato da ABS con angoli arrotondati
Collega fino a 3 elementi dell'EPA a massa
Completa di cavo di massa da 2 m con terminali a forcella
Sagomato da ABS con angoli arrotondati
Typical Applications
ESD grounding accessories form part of a workplace safety system to monitor and/or eliminate the build-up or discharge of static electricity that may pose a risk to electrical components such as computer hard drives.
FAQs
What are ESD grounding accessories used for?
ESD (electrostatic discharge) grounding accessories are components within ESD grounding loops. These accessories are used in workplaces where sensitive electronic equipment must be protected from static electricity, or where there's a danger of flammable liquids or gases igniting.
ESD protection is achieved by electrical grounding. Grounding accessories are components that may be required as part of an entire ESD grounding system. They're often used to connect and integrate ESD-safe mats, ESD continuous monitors, wrist straps, ESD safe shoe covers and other apparel, or ESD-safe surfaces.
What types of ESD grounding accessories are available?
Available accessories include a range of connectors, bonding points, bonding plugs, bonding boxes, bonding brackets, earthing wires, individual replacement snap studs, stud installation tools, earth stud kits, crocodile clips and a variety of adaptors such as stud-to-banana sockets.
ESD (electrostatic discharge) grounding accessories are components within ESD grounding loops. These accessories are used in workplaces where sensitive electronic equipment must be protected from static electricity, or where there's a danger of flammable liquids or gases igniting.
ESD protection is achieved by electrical grounding. Grounding accessories are components that may be required as part of an entire ESD grounding system. They're often used to connect and integrate ESD-safe mats, ESD continuous monitors, wrist straps, ESD safe shoe covers and other apparel, or ESD-safe surfaces.
What types of ESD grounding accessories are available?
Available accessories include a range of connectors, bonding points, bonding plugs, bonding boxes, bonding brackets, earthing wires, individual replacement snap studs, stud installation tools, earth stud kits, crocodile clips and a variety of adaptors such as stud-to-banana sockets.
Standard
Conforme al programma di controllo ESD S20.20 e ESD EN 61340-5-1
Specifiche
Attributo | Valore |
---|---|
Tipo accessori | Scatola di collegamento messa a terra |
Tipo di connettore | 3 bottoni 10mm |
Tipo di terminazione | Terminale ad occhiello |
Conforme a EN 61340-5-1 | Sì |
Resistenza | 1mΩ |
Tipo di cavo | Dritto |
Link consigliati
- Vite del cavo di messa a terra ESD RS PRO Bottone 10mm
- Set di cavi e cinghietta da polso messa a terra ESD RS PRO Bottone 10mm
- Staffa di messa a terra ESD RS PRO 2 bottoni 4mm
- Staffa di messa a terra ESD RS PRO, 3 bottoni 10mm
- Staffa di messa a terra ESD RS PRO, 3 bottoni banana 4mm
- Scatola di messa a terra ESD RS PRO 2 prese 4mm
- Scatola di messa a terra ESD RS PRO, 2 bottoni 10mm
- Connettore maschio di messa a terra ESD RS PRO spina tipo G - UK