- Codice RS:
- 122-9148
- Costruttore:
- RS PRO
24 In consegna il giorno lavorativo successivo per ordini pervenuti entro le 19:00 (magazzino in Italia)
174 Entro 1 giorni lavorativi per ordini effettuati entro le 19:00 (magazzini in Europa)
Aggiunto
Prezzo per Unità
16,21 €
(IVA esclusa)
19,78 €
(IVA inclusa)
Unità | Per unità |
1 + | 16,21 € |
- Codice RS:
- 122-9148
- Costruttore:
- RS PRO
Documentazione Tecnica
Normative
Non applicabile
Dettagli prodotto
Kit di montaggio a scatto universale ESD RS Pro
Il kit di montaggio a innesto universale ESD RS Pro contiene tutto il necessario per aggiungere nuovi collegamenti a scatto. Il kit consente di fornire un percorso di messa a terra per garantire che i materiali protettivi ESD e le persone abbiano lo stesso potenziale elettrico. Il kit contiene tutto il necessario per l'installazione di un perno o un connettore femmina in materiale morbido fino a 10 mm. È possibile praticare un foro attraverso il materiale e avvitare sul connettore femmina o sul perno utilizzando solo un cacciavite Philips che non è incluso nel kit.
Features and Benefits:
CARATTERISTICHE E VANTAGGI:
Kit di montaggio a innesto completo
Kit comprendente:
Perno da 10 mm
Connettore femmina da 10 mm
Rondella posteriore filettata
Dado conico
Vite lunga
Vite corta
Etichetta per punto di messa a terra comune ESD
Kit comprendente:
Perno da 10 mm
Connettore femmina da 10 mm
Rondella posteriore filettata
Dado conico
Vite lunga
Vite corta
Etichetta per punto di messa a terra comune ESD
VITI:
6-32 viti Phillips a testa piatta
1 x 6 mm
1 x 10 mm
1 x 6 mm
1 x 10 mm
Typical Applications
ESD grounding accessories form part of a workplace safety system to monitor and/or eliminate the build-up or discharge of static electricity that may pose a risk to electrical components such as computer hard drives.
FAQs
What are ESD grounding accessories used for?
ESD (electrostatic discharge) grounding accessories are components within ESD grounding loops. These accessories are used in workplaces where sensitive electronic equipment must be protected from static electricity, or where there's a danger of flammable liquids or gases igniting.
ESD protection is achieved by electrical grounding. Grounding accessories are components that may be required as part of an entire ESD grounding system. They're often used to connect and integrate ESD-safe mats, ESD continuous monitors, wrist straps, ESD safe shoe covers and other apparel, or ESD-safe surfaces.
What types of ESD grounding accessories are available?
Available accessories include a range of connectors, bonding points, bonding plugs, bonding boxes, bonding brackets, earthing wires, individual replacement snap studs, stud installation tools, earth stud kits, crocodile clips and a variety of adaptors such as stud-to-banana sockets.
ESD (electrostatic discharge) grounding accessories are components within ESD grounding loops. These accessories are used in workplaces where sensitive electronic equipment must be protected from static electricity, or where there's a danger of flammable liquids or gases igniting.
ESD protection is achieved by electrical grounding. Grounding accessories are components that may be required as part of an entire ESD grounding system. They're often used to connect and integrate ESD-safe mats, ESD continuous monitors, wrist straps, ESD safe shoe covers and other apparel, or ESD-safe surfaces.
What types of ESD grounding accessories are available?
Available accessories include a range of connectors, bonding points, bonding plugs, bonding boxes, bonding brackets, earthing wires, individual replacement snap studs, stud installation tools, earth stud kits, crocodile clips and a variety of adaptors such as stud-to-banana sockets.
Nota
Il cacciavite Phillips non è incluso in questo kit
Kit di montaggio
Kit di montaggio per prodotti sensibili a ESD
Specifiche
Attributo | Valore |
---|---|
Tipo accessori | Kit universale a scatto |
Tipo di connettore | Presa 10mm, Bottone 10mm |
Tipo di terminazione | Morsetto a vite |
Conforme a EN 61340-5-1 | Sì |
Diametro perno | 10mm |
Link consigliati
- Vite del cavo di messa a terra ESD RS PRO Bottone 10mm
- Set di cavi e cinghietta da polso messa a terra ESD RS PRO Bottone 10mm
- Staffa di messa a terra ESD RS PRO 2 bottoni 4mm
- Staffa di messa a terra ESD RS PRO, 3 bottoni 10mm
- Kit per il campo ESD RS PRO Bottone 10mm, spina tipo G - UK
- Innesto ESD RS PRO, Bottone 10 mm
- Scatola di messa a terra ESD RS PRO, 3 bottoni 10mm
- Scatola di messa a terra ESD RS PRO, 2 bottoni 10mm