- Codice RS:
- 454-0580
- Codice costruttore:
- NT21ST121BE
- Costruttore:
- Omron
Prodotto discontinuato
Alternativa
Prodotto al momento non disponibile. Ti suggeriamo la seguente alternativa.
- Codice RS:
- 454-0580
- Codice costruttore:
- NT21ST121BE
- Costruttore:
- Omron
Normative
Non applicabile
Dettagli prodotto
Pannello touch screen NT21
Il più recente sviluppo Omron per interfacce operatore di piccoli touch screen che ha le stesse dimensione di foratura del precedente NT20S. Questo touch screen ha molte altre caratteristiche e funzioni ma può rimanere compatibile con gli schermi precedenti passando alla modalità NT20S.
Memoria flash dello schermo 512 kb
3999 schermate
91 interruttori a sfioramento per schermata
Due porte RS232C, una con protocollo per lettore di codici a barre incorporato
Funzioni matematiche
Collegamento di memoria al personal computer o al processore che esegue un programma di base
Funzione console di programmazione PLC Omron e supporto per tutti gli attuali controller programmabili Omron
3999 schermate
91 interruttori a sfioramento per schermata
Due porte RS232C, una con protocollo per lettore di codici a barre incorporato
Funzioni matematiche
Collegamento di memoria al personal computer o al processore che esegue un programma di base
Funzione console di programmazione PLC Omron e supporto per tutti gli attuali controller programmabili Omron
Cronologia degli allarmi collegati al clock in tempo reale PLC Omron per contrassegnare gli allarmi con marcatura temporale
È possibile importare immagini bitmap
Grafico della tendenza con memoria a bordo scheda, misuratore analogico e funzione ricette
Tastierino a comparsa per l'immissione di valori alfanumerico
Cicalino
Software di programmazione NT Shell disponibile per il download gratuito sul sito Web www.ia.omron.com
È possibile importare immagini bitmap
Grafico della tendenza con memoria a bordo scheda, misuratore analogico e funzione ricette
Tastierino a comparsa per l'immissione di valori alfanumerico
Cicalino
Software di programmazione NT Shell disponibile per il download gratuito sul sito Web www.ia.omron.com
Nota
È possibile utilizzare un cavo di programmazione di 2 m (216-4667) con questo pannello
Omron Touch-Screen HMI Display
The Omron 5.2inch touch screen HMI display is a panel-mounted device with responsive touch screen for operator input. This is the latest development for small touch screen operator interfaces. This touch screen has many more features and functions but can remain compatible with the earlier screen by changing to NT20S mode.
Note
2m programming cable (216-4667) may be used with this panel.
Note
2m programming cable (216-4667) may be used with this panel.
Features and Benefits
• Two RS-232C ports in the NT21 (compared with one in the NT20S) enable simultaneous connection of a PLC, bar code reader, and an NT support tool (connectable to serial port A only)
• With 512Kb of memory capacity, there is more than ample space for storing screen data
• In addition to the host link and 1:1 NT link communications, the NT21 supports high-speed 1:N NT links and memory link communications
• An alarm message can be displayed in response to PLC bit status and the content and time of the message can be stored as an alarm history
• The NT21 is equipped with many of the same functions as the SYSMAC PLC programming console
• I/O comments in the I/O tables of the CX-programmer can be used directly
• Import bit map image
• Trend graph with on-board memory, analogue meter and recipe functions
• Pop-up key pads for alphanumeric entry
• PLC programming console function and supports all current programmable controllers
• Resolution is 260x140pixels
• With 512Kb of memory capacity, there is more than ample space for storing screen data
• In addition to the host link and 1:1 NT link communications, the NT21 supports high-speed 1:N NT links and memory link communications
• An alarm message can be displayed in response to PLC bit status and the content and time of the message can be stored as an alarm history
• The NT21 is equipped with many of the same functions as the SYSMAC PLC programming console
• I/O comments in the I/O tables of the CX-programmer can be used directly
• Import bit map image
• Trend graph with on-board memory, analogue meter and recipe functions
• Pop-up key pads for alphanumeric entry
• PLC programming console function and supports all current programmable controllers
• Resolution is 260x140pixels
Applications
• Automation
• Control panels
• Manufacturing industry
• Control panels
• Manufacturing industry
Certifications
• UL approved
• cULus approved
• IP65 rated
• cULus approved
• IP65 rated
Specifiche
Attributo | Valore |
---|---|
Serie | NT21 |
Tipo display | LCD |
Codice produttore | NT21ST121BE |
Risoluzione display | 260 x 140pixels |
Tipo di porta | RS-232 |
Memoria onboard | 512 kB |
Retroilluminazione | Sì |
Tensione di alimentazione | 24 V c.c. |
Colore display | Monocromatico |
Larghezza | 110mm |
Profondità | 53.5mm |
Dimensioni | 190 x 110 x 53,5 mm |
Lunghezza | 190mm |