Relè di monitoraggio Tensione Omron K8AK-VW2 100-240VAC serie K8AK-VW, SPDT

Il reset manuale e automatico può avvenire tramite un relè
Modalità di monitoraggio pre-allarme
Contenitori compatti
Resistente al rumore ad alta frequenza
Conforme agli standard globali di potenza e sicurezza

La serie Omron K8AK di relè di monitoraggio è stata progettata sulla base di una lunga esperienza nel settore per effettuare il monitoraggio preciso e affidabile di apparecchiature e stabilimenti industriali. I relè K8AK-VW/VS sono la soluzione ideale per il monitoraggio di sottocorrente e di sovracorrente, che il K8AK-VW è in grado di effettuare simultaneamente.

• Monitors over and under voltages simultaneously.
• Separate settings and outputs supported for over and under voltages.
• Manual reset and auto resetting supported by 1 relay.
• Pre-alarm monitoring mode.
• Two SPDT output relay. 5 A at 250 V ac (resistive load)
• LED output status indicator.
• Process control signal (0 to 10 V) current splitter input supported.
• Input frequency 40 Hz to 500 Hz
• Inputs isolated from the power supply

• Monitoring Relay.
• Power supply 100 V ac to 240 V ac.
• Setting range 1 to 10 V ac/dc, 3 to 30 V ac/dc, 15 to 150 V ac/dc.

• Power supply (isolated) 24 V ac/dc, 100 to 240 V ac.
• Manual/ Automatic reset (switchable)
• Manual reset – Turn OFF the power supply for minimum of 1 sec.
• Power on lock time 1 s or 5 s (using DIP switch)
• Green LED Power (PWR)
• Yellow LED Relay output (RY)
• Red LED Relay output (ALM)
• Two SPDT relays normally closed (NC)
• DIN Rail Mounted
• Weight 150 g
• Case material PC and ABS, UL 94 V-0
• Colour N1.5
• Protection IP20 (terminals)

A monitoring / measuring relay is a protective control device, various types are available suiting what you wish to monitor. The relays receive input signals then monitor them and then output an alarm signal when a set value is reached (alarm relays). The relays protect your equipment against over voltage and over current faults. Monitoring relays monitor AC power supplies, voltage and current, analogue signals detecting unusual activity in equipment against set alarm thresholds.

• Motor protection relays
• Temperature monitoring relays
• Water level control relays
• Voltage
• Current

UL 60947-5-1, UL 508, IP 20